1 × 15-inch, 2-way, non-powered
1 × 15-inch, 2-way, non-powered
1 × 15-inch, 2-way, non-powered
1 × 15-inch, 2-way, non-powered
1 × 15-inch, 2-way, non-powered
1 × 15-inch, 2-way, non-powered
1 × 15-inch, 2-way, non-powered
1 × 15-inch, 2-way, non-powered
1 × 15-inch, 2-way, non-powered
1 × 15-inch, 2-way, non-powered

E115, Passive loudspeaker, 15-inch, 2 way

1 × 15-inch, 2-way, non-powered

Artno: 571538

939 € (Alv 25.5%)

Kuvaus

Määrittely

The E115 is a trapezoidal, two-way loudspeaker using a 15-inch, 500W, die cast aluminum frame woofer with a 3.5-inch voice coil. It is intended for use when high-power and authoritative low-end are needed from a full-range loudspeaker. A 2.8” compression driver attached to the 75° DMTTM waveguide assures that even distant listeners will be well covered.

E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.

High output, professional quality sound with E115 – 500 W continuous power

E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.

E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers:

- For PLD/CXD visit Amplifier Navigator Software

- For GXD visit the GXD Firmware Updater

Titanium diaphragm for high fidelity and long life

Rugged tour-grade textured paint

Foam-lined perforated steel grill

Available U-Style Yoke and M10 rigging kit for permanent installation

Dual angle pole socket

Our website uses cookies. By continuing to surf on the page, you agree to us using cookies. Click here for more information.

I understand